How Much Does a Garage Floor Coating Cost in Vancouver?

A professional epoxy-and-polyaspartic garage floor coating in Vancouver and the Lower Mainland typically costs about $7 to $12 per square foot, which works out to roughly $3,000–$7,200 for a standard two-car garage. The exact price depends on the size of your garage, the condition of your concrete, and the coating system used. Budget DIY epoxy kits cost less up front ($2–$5 per square foot) but rarely last more than a few years.

The short answer

For a full-flake, professionally installed system — diamond-ground prep, epoxy base, full vinyl flake, and a UV-stable polyaspartic top coat — expect somewhere in the $7–$12 per square foot range in Metro Vancouver. Wish Coatings uses simple, transparent flat-rate pricing so you're not guessing; preview the finish on a photo of your own floor with the free visualizer, and a free on-site visit confirms your firm, all-inclusive number.

Garage floor coating cost by size

Here are typical all-in ranges for a professional full-flake system, based on common Lower Mainland garage sizes:

Ranges are estimates for a professionally installed epoxy + full-flake + polyaspartic system. Your exact price depends on slab condition and prep — see it on your own floor with the visualizer, then get a firm number at your free site visit.

What affects the price

• Square footage — the single biggest factor; larger floors cost less per square foot but more in total.
• Concrete condition — cracks, spalls, pitting, old coatings or moisture issues add prep time.
• Coating system — a single-coat DIY epoxy is cheap; a layered epoxy-flake-polyaspartic system costs more and lasts far longer.
• Prep method — proper diamond grinding costs more than an acid-etch or paint-style shortcut, and it's the difference between a floor that lasts a decade and one that peels in a year.
• Access & layout — tight access or heavily obstructed garages can take longer.

Why the cheapest quote often costs the most

The lowest bids usually cut the step you can't see: surface prep. A coating applied over a poorly prepped or acid-etched slab can look fine for a season, then peel, bubble or suffer hot-tire pickup — and fixing a failed floor means paying to grind it off and start over. Paying once for proper diamond grinding and a quality layered system is almost always cheaper than paying twice. This is why we back our floors with a 15-year workmanship and 15-year manufacturer warranty.

DIY vs. professional cost

A big-box DIY epoxy kit runs roughly $2–$5 per square foot in materials, but these kits use low-solids resin, acid-etch prep instead of grinding, and no UV-stable top coat — so they commonly fade, peel and wear within a few years. A professional system costs more up front but is engineered to last well over a decade. We break this down fully in our DIY vs. professional guide.

Ready for your number? Serving Vancouver, Surrey, Burnaby, Coquitlam, Langley, Abbotsford, Richmond and the wider Lower Mainland.

Frequently asked questions

How much does it cost to epoxy a 2-car garage in Vancouver?

A professionally installed full-flake epoxy and polyaspartic system for a standard two-car garage (about 400–600 sq ft) typically runs $3,000–$7,200 in Metro Vancouver, depending on the condition of your concrete. Upload a photo to our free online visualizer to see the finish on your own floor, then get your firm price at a free, no-obligation site visit.

What is the price per square foot for a garage floor coating?

Professional epoxy-and-polyaspartic garage floors in the Lower Mainland typically run about $7–$12 per square foot installed. Budget DIY epoxy kits cost less ($2–$5 per square foot) but use lower-quality materials and rarely last.

Why are some garage floor quotes so much cheaper?

The cheapest quotes usually skip proper diamond grinding or use thin, low-solids materials. That can look fine briefly, then peel or bubble — and redoing a failed floor costs more than doing it right the first time. Always confirm the prep method and warranty.

Does Wish Coatings offer transparent pricing?

Yes. We use simple flat-rate pricing and give you a firm estimate range up front — no hidden fees or surprise upcharges. Preview your floor with the free online visualizer, then we confirm your exact price during a no-pressure on-site visit.